- WISE
- ARO/ Ingersoll Rand
- ROSEMOUNT
- LUOYANG
- CABLE SOURCE
- DRAGER
- J&R TECHNOLOGY
- HUNAN
- YOKOGAWA
- SHINKAWA
- UNILOK
- WOORI
- SENTEC
- DOW VALVE
- ROTAREX
- YAMARI
- HORIBA
- KSK
- ASTTAR
- KANOMAX
- OZON FACTORY
P110 WISE PRESSURE Meter
Model: P110
Black copper, steel/aluminum material
Face diameter: 40, 50, 60, 75, 100, 150 and 200 mm
-
1045
-
Contact us
-
- +
- Overview
- Specifications
- Comment
1. Introduction of P110 Pressure Meter
P110 pressure watches are South Korean Wise pressure watches distributed by Wise Vietnam,one of the leading pressure watch brands in the world, supplied and consumed globally. These are pressure gauges suitable for industrial environments in general, they are quite cheap, high quality and do not corrode. It can be used in the environment and is most suitable for use in gas, oil, gas and water pipelines.
2. P110 specifications
✦ Face Diameter – Nominal Diameter
- 40, 50, 60, 75, 100, 150 and 200 mm
- MPa, kPa, bar
- 40 mm:0~0.2 to 0~3.5 MPa
- 50 mm:0~0.2 to 0~10 MPa
- 60 and 75 mm: -0.1~0 to 0~25 MPa
- 100 mm (New): -0.1~0 to 0~35 MPa
- 100 and 150 mm: -0.1~0 to 0~100 MPa
- 200 mm: -0.1~0 to 0~35 MPa
- Surroundings: -20~65oC
- Fluid Brass: Max -5~40oC
- Fluid Stainless Steel: Max 200oC
✦ Precision level
- 40 mm: ± 3.0% of the entire scale.
- 50, 60, 75, 100, 150 and 200 mm: ± 1.5% of the entire scale.
3. Connection materials and standards
Pressure Connection Material | Copper |
Bourdon Tube Pressure Transmission |
|
Shell | Aluminum/Black Painted Steel (200mm Thick) |
Outer sheath | Black steel |
Observation glass | Glass |
Actuation Unit | Copper |
Number on the watch face | Black Painted White Aluminum |
Clock needle | Black Aluminum Alloy |
Connection standards |
|
4.Cp110 pressure clock
Take a look at the image below for more on the Wise P110 pressure gauge.
5. Instructions before installing P110
- Avoid places with moisture, vibration, dust and corrosive gases.
- Avoid places where the temperature is higher than the recommended ambient temperature.
- Avoid the direct rays of the sun.
-
When installing on the wall, there should be racks or support accessories to ensure certainty.
-
It is recommended to use soft pipes for pressure pipes so that the pressure meter is not overloaded.
- When installing the device, avoid using your hands, use supporting accessories to install.
6. Some notes when installing and using
- If used for corrosive liquids, it is necessary to install additional flange diaphragms
- If the diaphragm is placed far from the pressure meter, it is necessary to make sure the diaphragm and the clock are on the same plane.
- If used for hot liquids, it is recommended to add an auxiliary device that is a font.
- The machine will operate unstablely in case of sudden increase and decrease in pressure
- If there may be vibration or impact pressure, install a damper or gauge
-
Check regularly once or twice a year to check the state of activity and try.
- Bourdon pipes and pressure-connected drives are fragile at high temperatures, adding a font poker tube if necessary.